Christie Crimson WU31K & Christie DWU23‑HS Projector Protective All‑Weather Enclosure for Wall 3D Mapping
Christie Crimson WU31K & Christie DWU23‑HS Projector Protective All‑Weather Enclosure for Wall 3D Mapping
Protecting a Landmark Projection Mapping Installation at Window of the World
Large‑scale architectural 3D mapping demands more than just powerful projectors – it demands absolute reliability in unpredictable outdoor conditions. This case study documents the successful deployment of eight outdoor projector all‑weather enclosures, protecting a mixed fleet of Christie Crimson WU31K and Christie DWU23‑HS projectors at the iconic Window of the World theme park.
The project called for permanent, weather‑resistant housing solutions that would enable stunning façade projections night after night, regardless of rain, heat, or dust – all while preserving the projectors’ optical performance and serviceability.
The Project: Window of the World – A Global Landmark
Window of the World is one of Asia’s most renowned cultural theme parks, featuring miniature replicas of global landmarks. To elevate the visitor experience, a large‑scale permanent 3D mapping show was designed to project dynamic visuals onto a massive exterior wall – transforming it into a living canvas.
With shows running every evening and equipment exposed to the elements year‑round, the technical team required a robust protection system that would:
Withstand seasonal heat, monsoon rains, and coastal humidity.
Maintain consistent internal climate for two different projector models.
Allow fast maintenance without disrupting show schedules.
Blend unobtrusively into the venue’s architectural environment.
The Challenge: Two Projector Models, One Unified Solution
The installation used eight projectors in total:
Christie Crimson WU31K – 31,000 lumens, 3DLP, designed for high‑impact large‑venue projections.
Christie DWU23‑HS – 23,000 lumens, 1DLP, offering high brightness in a compact form factor.
While both are premium professional projectors, they differ in size, heat output, airflow design, and lens position. The housing solution had to accommodate both models seamlessly – without requiring custom redesigns for each unit.
Key environmental threats included:
| Threat | Impact |
|---|---|
| Direct sunlight | Internal overheating and UV damage to cables. |
| Typhoon‑driven rain | Water ingress into optical and electronic systems. |
| High humidity (80%+) | Condensation on lenses and internal optics. |
| Dust and airborne particles | Filter clogging and reduced cooling efficiency. |
| Temperature fluctuations | Thermal stress on laser banks and colour uniformity. |
Our Solution: Universal All‑Weather Enclosures with Active Climate Control
We supplied eight custom‑tuned outdoor projector enclosures – each engineered to house either the Crimson WU31K or the DWU23‑HS with tailored mounting brackets and airflow redirection. Every enclosure delivered identical environmental protection, ensuring consistent performance across the entire projection array.
Core Engineering Features
| Feature | Function & Benefit |
|---|---|
| Closed‑loop air conditioning | Maintains internal temperature at 20–25°C, even when ambient exceeds 38°C. |
| IP54 / IP55 weatherproof rating | Protects against rain, dust, and splashing – suitable for exposed outdoor walls. |
| Intelligent humidity control | Integrated dehumidifier and sensor prevent optical fogging and corrosion. |
| Dual‑layer solar‑reflective roof | Reduces solar heat gain, cutting cooling load by up to 30%. |
| Adjustable projector mounts | Accommodates both Crimson WU31K and DWU23‑HS with different lens heights and centre‑of‑gravity. |
| Quick‑release service panels | Enables lamp, filter, and lens access within minutes – essential for nightly show readiness. |
| Pressurised cable entry glands | Maintains seal integrity while allowing organised power/fibre/SDI cabling. |
| Remote monitoring interface | Optional temperature/humidity alarms for integration with park’s central control room. |
Each housing was factory‑tested with thermal simulators matching the heat dissipation of both projector models, ensuring the cooling system responded correctly to real‑world load profiles.
Installation at Window of the World
The enclosures were mounted on structural steel frames along the projection wall, positioned for optimal throw distance and minimal visual intrusion. The installation team completed on‑site assembly and alignment in coordination with the park’s operations schedule – minimising disruption to daytime visitor activities.
Site‑Specific Adaptations
Elevated mounting – housings were placed at heights that avoided accidental contact while allowing ground‑level service access via ladder platforms.
Aesthetic finishing – enclosures were finished in a neutral tone to blend with the wall surface.
Cable routing – all signal and power lines were run through concealed conduits to maintain a clean façade appearance.
Operational Results
After three months of continuous nightly operation, the system has delivered exceptional reliability:
| Metric | Outcome |
|---|---|
| Internal temperature stability | Maintained within ±2°C of setpoint across all eight units. |
| Condensation incidents | Zero – no optical fogging or moisture alerts. |
| Projector performance | Full rated brightness and colour accuracy on both Crimson and DWU models. |
| Maintenance interventions | Scheduled filter cleaning only – no unscheduled service calls. |
| Show uptime | 100% – no weather‑related cancellations or interruptions. |
Client Testimonial
“We needed a protection solution that would treat our Christie projectors as carefully indoors – even when they were mounted on an exterior wall. The enclosures delivered exactly that. The fact that the same housing design worked for both Crimson and DWU models simplified our logistics and spares planning immensely.”
– Technical Director, Window of the World Projection Team
Why Choose Our Outdoor Projector Enclosures?
| Criterion | Our Advantage |
|---|---|
| Multi‑model compatibility | Single enclosure design supports Crimson WU31K and DWU23‑HS with adjustable mounts. |
| Tropical‑grade cooling | Rated for 40°C ambient with 80%+ RH – built for subtropical and coastal climates. |
| Durable construction | Marine‑grade aluminium with anti‑corrosion treatment – 10‑year structural life. |
| Service‑first design | Tool‑less access to critical projector components without unbolting the housing. |
| Global shipping & support | Full export documentation, including CE and local electrical compliance. |
Project Summary
| Item | Detail |
|---|---|
| Project | Window of the World – Permanent Wall 3D Mapping Show |
| Projectors | Christie Crimson WU31K (multiple) + Christie DWU23‑HS (multiple) |
| Total projectors | 8 units |
| Enclosures supplied | 8 all‑weather climate‑controlled housings |
| Location | Window of the World Theme Park |
| Environmental conditions | High heat, high humidity, seasonal typhoons, direct sunlight |
| Housing protection | IP54 / IP55 with active cooling + dehumidification |
| Operational status | Live – nightly shows running with 100% uptime |
Projector Enclosure Photo
Ready to Safeguard Your Outdoor Projection Installation?
From theme parks to architectural landmarks, our all‑weather enclosures are trusted by integrators worldwide to protect high‑value projection equipment in the harshest environments.
Get in touch to discuss your projector models, site conditions, and show schedule – we’ll design a housing solution that keeps your content centre stage.
LEAVE A COMMENT