Universal All-Weather Forced Air Projector Housing 10000-20000lm

A universal all-weather forced air projector housing is a professional-grade protective enclosure designed to accommodate 10,000-20,000 lumen projectors for permanent or semi-permanent outdoor installations. These units provide comprehensive environmental protection while maintaining optimal operating conditions for high-brightness projectors.

Key Specifications & Features

1. Universal Compatibility Design

• Adjustable Mounting Platform: Sliding rails or modular brackets accommodate various projector sizes and mounting patterns

• Universal Power Interface: Multi-voltage input (100-240V AC) with universal power outlets inside

• Flexible Cable Ports: Gland-sealed ports for power, control (HDBaseT, RS-232, LAN), and video signals (HDMI, DisplayPort, SDI options)

• Adaptor Kits: Available for specific projector models and brands (Christie, Barco, Panasonic, etc.)

2. Environmental Protection

• IP Rating: Typically IP55 or IP65

  • IP55: Protected against dust ingress and low-pressure water jets from any direction

  • IP65: Dust-tight and protected against powerful water jets

• Operating Temperature Range: -30°C to +50°C (external) while maintaining 15°C-30°C internally

• Material Construction:

  • Powder-coated aluminum or galvanized steel

  • UV-stabilized polycarbonate or optical glass window

  • Corrosion-resistant hardware (stainless steel fasteners)

• Impact Resistance: IK08 or higher rating for vandal resistance

3. Climate Control System

• Active Forced-Air Cooling:

  • Dual fans (intake/exhaust) with variable speed control

  • High-CFM fans (100-200+ CFM capacity)

  • HEPA or pleated filters for dust protection

• Heating Element:

  • 300-600W thermostatically controlled heater

  • Prevents condensation and maintains minimum temperature

• Advanced Models May Include:

  • Thermo-electric (Peltier) cooling for moderate climates

  • Refrigerated cooling options for extreme heat

  • Humidity sensors and dehumidification systems

Optical Performance

• Projection Window:

  • Anti-reflective coated optical glass

  • Heated glass option to prevent fogging/icing

  • Neutral density or color-correcting options available

• Lens Access:

  • Removable front panel for lens adjustment

  • External focus/zoom adjustment rods (optional)

• Keystone Correction: Built-in mechanical adjustment capabilities

Performance Specifications

Power Requirements

• Typical Power Consumption:

  • Housing systems: 150-800W (depending on cooling/heating needs)

  • Total system: Projector wattage + 20-30% for climate control

• Input Voltage: 100-240V AC, 50/60Hz

• Maximum Load: 15-20A circuit recommended

Physical Dimensions

• Typical Size Range:

  • Length: 750-1000mm

  • Width: 650-800mm

  • Height: 400-600mm

  • Weight: 30-65kg (empty)

Installation Considerations

Site Requirements

1. Clearance Space:

   • 300mm minimum around housing for airflow

   • Front: 1-2x throw distance depending on lens

   • Rear: 500mm for service access

2. Environmental Factors:

   • Avoid direct spray from irrigation

   • Consider sun exposure on housing

   • Account for seasonal wind patterns

3. Safety Features:

   • Surge protection (10-20kA)

   • Thermal cut-off switches

   • Emergency ventilation

   • Condensation drainage

Maintenance Schedule