Epson EB-PU2220B Quad-Projector Fully Sealed Air Conditioned All-Weather Housing System

Pole-Mounted Array for Monumental Wall 3D Mapping

80,000-Lumen Powerhouse for Architectural Transformation

The Quad-Projector Fully Sealed Air Conditioned All-Weather Housing System engineered specifically for four Epson EB-PU2220B laser projectors (20,000 lumens each). This pole-mounted fortress delivers a combined 80,000 lumens of brilliant, climate-controlled projection power—optimized for breathtaking architectural 3D mapping on skyscrapers, monuments, stadiums, and expansive urban canvases.

Quad-Array Configuration for Maximum Impact

Strategic Projector Layout

• 2×2 Matrix Configuration – Two projectors stacked vertically, replicated side-by-side

• Pre-Aligned at Factory – Projectors positioned for optimal edge-blending and geometric alignment

• Unified Optical Interface – Single large-format optical glass maintains image consistency

• Synchronized Operation – All four projectors controlled as a single unified system

Wall 3D Mapping Advantages

• Massive Brightness – 80,000 lumens cuts through urban light pollution

• Wide Coverage – Covers building facades up to 150 meters wide

• Pixel-Dense Detail – Enables intricate 3D mapping with fine detail retention

• Redundancy – System operates at reduced capacity if one projector fails

Quad-Zone Climate Control System

Independent Thermal Management

• Four Separate Chambers – Each EB-PU2220B operates in its own IP66-sealed environment

• Active Air Conditioning – 20,000 BTU total capacity (5,000 BTU per projector zone)

• Precision Temperature Control – Maintains 22°C ±1.5°C internally in ambient -25°C to +50°C

• Condensation Defense – Heated optical glass and active dehumidification

Advanced Cooling Architecture

• Zero Thermal Interference – Complete isolation between projectors

• Redundant Cooling – Each zone operates independently for maximum reliability

• Energy-Efficient Inverters – Variable speed compressors adjust to thermal load

Heavy-Duty Custom Pole Mount System

Engineered for Quad-Array Load

• Pole Specifications: 350mm diameter galvanized steel, heights 8m–20m

• Load Capacity: Rated for 600kg (enclosure + projectors + environmental loads)

• Vibration Damping: Multi-point isolation with seismic-rated dampers

• Internal Cable Management: 200mm conduit for power, fiber, and control runs

Mounting & Positioning Features

• Motorized Tilt: ±15° vertical adjustment for optimal throw angle

• 360° Rotation: Remote-controlled horizontal positioning

• Service Access System: Optional motorized lowering platform

• Foundation Options:

  • Permanent: Reinforced concrete pier with seismic anchoring

  • Semi-Permanent: Bolt-down flange system

  • Temporary: Ballast tank system (1000kg capacity)

Technical Specifications

Photos On Installation Site

Wall 3D Mapping Precision Features

Calibration & Alignment System

• Motorized Micro-Adjustment – Remote control of pitch, roll, yaw for each projector

• Integrated Alignment Lasers – Four-point laser system for rapid setup

• Calibration Camera Ports – Access for photogrammetry without breaking seal

• Built-in Test Patterns – Generator accessible via service Ethernet port

Projection Optimization

• Lens Compatibility: Supports Epson ELPLX01, ELPLX02, and ELPLX03 series

• Throw Distance: Optimized for 20m–120m throws

• Blending Zone Control: Precisely adjustable overlap regions

• Geometric Correction: Hardware-accelerated warping capability

Application Scenarios

Architectural & Urban Projection

• Skyscraper Facade Mapping – Transform towers into dynamic visual displays

• Stadium & Arena Exteriors – Large-scale sports and entertainment visuals

• Historical Monument Illumination – Cultural storytelling on heritage structures

• Museum & Institution Night Projections – Educational and artistic displays

Event & Spectacular Productions

• City-Wide Festivals – Main attraction for light festivals and public events

• Corporate Mega-Events – Headquarters launches and brand experiences

• Concert Tour Productions – Massive stage extensions and environmental effects

• Public Art Installations – Temporary or permanent urban art projects

Professional Installation & Commissioning

Site Preparation Requirements

• Geotechnical Survey – Soil analysis for foundation design

• Electrical Infrastructure – Dedicated 3-phase power with backup capability

• Data Connectivity – Fiber optic conduits for high-bandwidth content

• Crane/Lift Planning – Equipment for pole erection and enclosure placement

Commissioning Process

1. Foundation & Pole Installation – Structural mounting and alignment

2. Enclosure Mounting – Secure attachment and cable routing

3. Projector Integration – Installation, power, and data connection

4. System Calibration – Geometric correction, edge blending, color matching

5. Environmental Testing – 96-hour continuous operation under varying conditions

6. Content Integration – 3D mapping alignment and performance verification

7. Training & Handover – Operational training and documentation delivery

Safety, Compliance & Certification

Structural Engineering

• Wind Load Certification – Rated for 160 km/h winds with safety factor

• Seismic Design – Zone 4 compliance with dynamic analysis

• Load Testing – Factory proof-tested to 200% of design load

• Professional Engineering – PE-stamped drawings and calculations

Electrical & Environmental Compliance

• Global Certifications – UL, CE, UKCA, IP66 (independently verified)

• Safety Systems – GFCI protection, surge suppression, emergency stop

• Environmental Sealing – IP66 verified per IEC 60529 standards

• Energy Efficiency – Meets international energy efficiency standards

This quad-projector system represents the pinnacle of architectural projection technology—transforming monumental surfaces into dynamic canvases with breathtaking scale, detail, and reliability.